STP08DP05MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP08D |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13.5mA |
| Output Current | 100mA |
| Max Supply Current | 13.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08DP05MTR Overview
Board space is saved by its 16-SOIC (0.154, 3.90mm Width) package.LED drivers are designed with 8 outputs.In order to mount the led light driver, Surface Mount is used.Linear emerges with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.The system operates with a termination of 0.In this LED driver, the base is configured as 16.Based on our estimates, there are 8 segments.It's mounted on the way to Surface Mount.Part number STP08D represents this LED driver.It is acceptable to have a maximum voltage of 5.5V.The output voltage of the device is 20V.A total of 16 pins are present on this device.As a result of its characteristics, it is also classified as Display Drivers.The minimal input voltage is 3V.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.In the case of supply current, there is a maximum value of 5.5V.As long as the supply current is less than 13.5mA, this device can provide high efficiency.It is possible to supply the load with 100mA current.This electronic component can fully perform its functions when the switching frequency is kept at 30MHz.
STP08DP05MTR Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Switching frequency of 30MHz
STP08DP05MTR Applications
There are a lot of STMicroelectronics STP08DP05MTR LED Driver ICs applications.
- Stage Lighting and Signage
- Down lights
- Dimmable LED for vehicle interiors
- Other Electronic Devices
- A- lamps
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- Refrigeration lighting
- Portable lighting
