STP08DP05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 100mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STP08D |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13.5mA |
| Output Current | 100mA |
| Max Supply Current | 13.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08DP05TTR Overview
In order to save board space, the 16-TSSOP (0.173, 4.40mm Width) package is used. LED drivers are designed with 8 outputs.It is possible to mount the led driver using Surface Mount.In this case, it emerges as a Linear with a high efficiency.If the led driver ic is set to -40°C~125°C TA, it will work normally.It operates with terminations of 16.It has a base of 16 pins.The number of segments is estimated to be 8.Surface Mount is mounted in the way.This LED driver can be found under the base part number STP08D.It is acceptable for the supply voltage to be 5.5V.In this device, the output voltage is 20V volts.It consists of 16 pins.In addition to Display Drivers, it is also classified by its characteristics.When the input voltage is set to 3V, it operates.To meet high efficiency standards, it works with a voltage of 3V.In terms of supply current, there is a maximum value of 5.5V.When the maximum supply current is below 13.5mA, the device can deliver high efficiency.100mA is the maximum current the load can handle.Having the switching frequency at 30MHz enables this electronic component to perform at its best.
STP08DP05TTR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Switching frequency of 30MHz
STP08DP05TTR Applications
There are a lot of STMicroelectronics STP08DP05TTR LED Driver ICs applications.
- OLED power supply for portable equipment
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for Tablets and Note PCs
- General lighting
- Street lighting
- Constant Voltage Power Source for portable equipment
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Medical surgery lighting
- Linear fluorescent
