STP08DP05XTTR
| Parameters | |
|---|---|
| Max Supply Current | 13.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STP08D |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13.5mA |
| Output Current | 100mA |
STP08DP05XTTR Overview
On the board, there is also a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package that saves space.In this LED driver, there are 8 outputs.Surface Mount is used to mount the led driver.In this case, the Linear emerges as highly efficient and reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.For its operation, terminations with a value of 0 are used.This LED driver is configured with a base of 16 pins.8 segments exist.Surface Mount has been mounted with the device.It's under the STP08D base part number.5.5V is a reasonable voltage.A voltage output of 20V is provided by this device.There are 16 pins on it.Moreover, it can be classified as Display Drivers due to its characteristics.A voltage of 3V is its minimal input voltage.For maximum efficiency, it requires a minimal supply voltage of 3V.Supply current cannot exceed 5.5V.The device can deliver high efficiency when the maximal supply current is less than 13.5mA.The load is capable of receiving 100mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.
STP08DP05XTTR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Switching frequency of 30MHz
STP08DP05XTTR Applications
There are a lot of STMicroelectronics STP08DP05XTTR LED Driver ICs applications.
- Sports Facility Lighting
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- Other Electronic Devices
- Linear fluorescent
- OLED power supply for portable equipment
- Refrigeration lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- LED headlights
