STP1612PW05XTTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP1612 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Max Supply Current | 60mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| fmax-Min | 30 MHz |
| Dimming | PWM |
| Number of Segments | 16 |
| Voltage - Supply (Max) | 5.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP1612PW05XTTR Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. As part of the design of this LED driver, there are 16 outputs that have been used.The led light driver is mounted using Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.The benefits are considerable for Backlight.Based on the frequency of 30MHz, it operates on the basis of a pulse.It operates with 24 terminations.It has a base of 24 pins.It is estimated that there are 16 segments.Surface Mount is mounted on it.There is a base part number STP1612 for this LED driver.There is no problem with the voltage of 5.5V.The voltage at the output terminal is 20V.There are 24 pins on it.5.5V is the maximum value of supply voltage it offers.As a result, its characteristics can also be categorized as Display Drivers.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.When the supply current should be less than 60mA, the device will provide high efficiency.
STP1612PW05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP1612PW05XTTR Applications
There are a lot of STMicroelectronics STP1612PW05XTTR LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Other Electronic Devices
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Amusement Machines
- High-end retail lighting
