STP16CL596B1R
| Parameters | |
|---|---|
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 14.1mA |
| Max Supply Current | 14.1mA |
| Voltage - Output | 16V |
| Topology | Shift Register |
| Current - Output / Channel | 90mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 4.32mm |
| Length | 31.75mm |
STP16CL596B1R Overview
The board's 24-DIP (0.300, 7.62mm) package saves space. LED drivers designed using this technology use 16 outputs.The led driver mounting is done by using Through Hole.In this case, it emerges as a Linear with a high efficiency.It is able to work normally at the operating temperature of -40°C~125°C TA.As a result, it operates in accordance with the frequency of 25MHz.There are 24 terminations that are designed to operate with it.There are 24 pins on the base of this LED driver.If the voltage supply is less than 3V, undetermined failures will occur.There are 16 segments in it.The mount is in the way of Through Hole.Under the base part number STP16C, you'll find this LED driver.The voltage of 3.6V is acceptable.16V is the voltage output.On it, there are 24 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.With a minimum supply current less than 14.1mA, this device achieves high efficiency.
STP16CL596B1R Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V
STP16CL596B1R Applications
There are a lot of STMicroelectronics STP16CL596B1R LED Driver ICs applications.
- Portable lighting
- Stage Lighting and Signage
- Amusement Machines
- LED Lightings for Industrial Equipment
- High-end retail lighting
- Industrial LED Lighting: Image Recognition Devices
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
