STP16CL596M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 14.1mA |
| Max Supply Current | 14.1mA |
| Voltage - Output | 16V |
| Topology | Shift Register |
| Current - Output / Channel | 90mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
STP16CL596M Overview
The board's 24-SOIC (0.295, 7.50mm Width) package saves space. It has 16 outputs for LED drivers.Surface Mount represents this mounting method.Linear emerges with high efficiency and reliability.The led light driver is capable of working normally at -40°C~125°C TA.In this case, the frequency is 25MHz.It is designed to work with 24 terminations.The base of this board is configured as 24 pins.If the voltage supply is less than 3V, undetermined failures will occur.A total of 16 segments are estimated.The mount is in the direction of Surface Mount.A base part number of STP16C is associated with this LED driver.3.6V is an acceptable maximum value for the supply voltage.There is 16V voltage output from it.In addition, it is equipped with a total of 24 pins.As a result, its characteristics can also be categorized as Display Drivers.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.When the maximum supply current is less than 14.1mA, the device is able to provide a high level of efficiency.
STP16CL596M Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V
STP16CL596M Applications
There are a lot of STMicroelectronics STP16CL596M LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Inspection Devices
- Sports Facility Lighting
- Panel lighting
- Portable lighting
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
