STP16CP05MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Current Rating | 100mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Max Output Voltage | 20V |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 2.45mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CP05MTR Overview
Using its 24-SOIC (0.295, 7.50mm Width) package, it is possible to save board space. Surface Mount is used to mount the led driver.When it emerges as a Linear, it performs extremely well and is highly reliable.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.In this case, it operates with terminations of 0.Its configuration is based on 24 pins.It is estimated that there are 16 segments.Surface Mount is mounted in the way.STP16C is the base part number for this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.It produces a voltage of 20V volts.On this device, there are 24 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.At a voltage of 3V, it operates at a minimal input voltage.For maximum efficiency, it requires a minimal supply voltage of 3V.There is 5.5V maximum value for supply current.As long as the maximum supply current is under 11.7mA, it can deliver high efficiency.A load can be supplied with 100mA current.Electronic components can function properly when their switching frequency is set to 30MHz.Ideally, the output voltage should not exceed 20V.
STP16CP05MTR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
STP16CP05MTR Applications
There are a lot of STMicroelectronics STP16CP05MTR LED Driver ICs applications.
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- Stage Lighting and Signage
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Refrigeration lighting
- High-end retail lighting
- Linear fluorescent
