STP16CP05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 100mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 100mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Max Output Voltage | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CP05TTR Overview
Save board space with 24-TSSOP (0.173, 4.40mm Width) package. For the design of this LED driver, 16 outputs are used.Surface Mount represents this mounting method.When it emerges as a Linear, it performs extremely well and is highly reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.In this case, there are 24 terminations.The LED light driver is configured with a base of 0 pins.16 segments exist.On the Surface Mount, a device is mounted.The base part number for this LED driver is STP16C.It is acceptable for the supply voltage to be 5.5V.In addition, it has 24 pins.In addition, its characteristics are classified into Display Drivers.A voltage of 3V is its minimal input voltage.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.Currently, the supply current can only reach 5.5V.With a minimum supply current less than 11.7mA, this device achieves high efficiency.The load is capable of receiving 100mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.LED drivers deliver all their benefits with a maximum output current of 100mA.Voltages should not exceed 20V volts at the output.
STP16CP05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
STP16CP05TTR Applications
There are a lot of STMicroelectronics STP16CP05TTR LED Driver ICs applications.
Portable lighting
Linear fluorescent
LED backlight driver for LCD displays for portable equipment
Museum lighting
Replacement lamps
General lighting
Down lights
Street lighting
Medical surgery lighting
Stage Lighting and Signage
