STP16CP05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 100mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CP05XTTR Overview
24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. LED drivers are designed with 16 outputs.Mounting is done according to the Surface Mount method.It is highly reliable and high-performing when it emerges as a Linear.-40°C~125°C TA is a valid operating temperature for the led driver.There are 24 terminations that are designed to operate with it.There are 24 pins on its base.The number of segments is estimated to be 16.The mount is in the direction of Surface Mount.Under the base part number STP16C, you will find this LED driver.There is no problem with the voltage of 5.5V.The output voltage is 20V.There are 24 pins on it.In addition, its characteristics are classified into Display Drivers.With a minimum input voltage of 3V volts, it can operate.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.The allowable maximum value of supply current reaches 5.5V.As long as the maximum supply current is under 11.7mA, it can deliver high efficiency.In this case, the load can only be supplied with 100mA current.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.
STP16CP05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
STP16CP05XTTR Applications
There are a lot of STMicroelectronics STP16CP05XTTR LED Driver ICs applications.
- Stage and Studio lighting
- LED Lightings for Inspection Devices
- Other Electronic Devices
- Architectural lighting
- Auxiliary lights for on-vehicle cameras
- Medical surgery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- White LED Backlight for portable equipment
- Refrigeration lighting
- Street lighting
