STP16CPC05MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPC05MTR Overview
In order to save board space, the 24-SOIC (0.295, 7.50mm Width) package is used. LED drivers have a total of 16 outputs that are used in the design of the drivers.Surface Mount is used to mount the led light driver.When it emerges as a Linear, it shows high-performance and reliability.This LED driver can be operated at a temperature of -40°C~125°C TA. On the basis of the frequency 30MHz, it operates.In order for it to operate, it has 24 terminations.In this LED driver, the base is configured as 24.It is likely that undetermined failures will occur if the voltage supply is less than 3V.A total of 16 segments are estimated.On the Surface Mount, a device is mounted.LED drivers can be found under the base part number STP16C.5.5V is an acceptable voltage.There is 20V voltage output from it.24 pins are used on the device.Furthermore, it can be categorized as Display Drivers based on its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.When the maximum supply current is less than 11.7mA, this device is capable of providing high efficiency.The current that can be supplied to the load is 100mA.
STP16CPC05MTR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPC05MTR Applications
There are a lot of STMicroelectronics STP16CPC05MTR LED Driver ICs applications.
- Sports Facility Lighting
- A- lamps
- Down lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General lighting
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- Other Electronic Devices
- Street lighting
- Refrigeration lighting
