STP16CPC05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPC05TTR Overview
To save board space, it uses the 24-TSSOP (0.173, 4.40mm Width) package. 16 outputs are designed into LED drivers.Surface Mount represents this mounting method.With high efficiency, it emerges as a Linear.LED drivers capable of operating at -40°C~125°C TA can be used.The system operates on the basis of the frequency 30MHz.It operates with 24 terminations.To form its configuration, 24 pins are used.The voltage supply can fail if it is below 3V.We estimate that there are 16 segments.There is a mounting of it by Surface Mount.LED drivers can be found under the base part number STP16C.It is acceptable to supply voltages of 5.5V volts.The device has a voltage output of 20V volts.There are 24 pins on it.In addition to Display Drivers, it is also classified by its characteristics.For highest efficiency, it works with a minimal supply voltage of 3V.A load can be supplied with 100mA current.
STP16CPC05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPC05TTR Applications
There are a lot of STMicroelectronics STP16CPC05TTR LED Driver ICs applications.
- Down lighting
- Down lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- LED headlights
- Other Electronic Devices
- Flicker-free LED Lighting using R1580N
