STP16CPC26PTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Lighting |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 30MHz |
| Base Part Number | STP16C |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 90mA |
| Max Supply Current | 15.3mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| fmax-Min | 30 MHz |
| Dimming | Analog |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.73mm |
| Length | 8.66mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPC26PTR Overview
The 24-SSOP (0.154, 3.90mm Width) package is used for saving board space. There are 16 outputs used for the design of this LED drivers.The mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.It is capable of operating at a temperature of -40°C~125°C TA. Lighting has many advantages.The system operates on the basis of the frequency 30MHz.In this case, the termination value is 24.There are 24 pins used to form the base of its configuration.The voltage supply can fail if it is below 3V.It is estimated that there are 16 segments.The mount is in the direction of Surface Mount.This LED driver has the part number STP16C.5.5V is an acceptable maximum value for the supply voltage.The voltage at the output terminal is 20V.It is also classified into Display Drivers according to its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.When the maximum supply current is below 15.3mA, the device can deliver high efficiency.In this case, the load can only be supplied with 90mA current.It is necessary to have 5V voltages inside systems to power them.
STP16CPC26PTR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Operating with the supply voltage of 5V
STP16CPC26PTR Applications
There are a lot of STMicroelectronics STP16CPC26PTR LED Driver ICs applications.
- Sports Facility Lighting
- Architectural lighting
- LED Lightings for Inspection Devices
- Down lights
- Street lighting
- Dimmable LED for vehicle interiors
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Other Electronic Devices
