STP16CPC26XTR
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 90mA |
| Max Supply Current | 15.3mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 90mA |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 16 |
| Max Junction Temperature (Tj) | 170°C |
| Switching Frequency | 30MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Ambient Temperature Range High | 125°C |
| Data Input Mode | SERIAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Lighting |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | STP16C |
| Number of Outputs | 16 |
STP16CPC26XTR Overview
In order to save board space, the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. These LED drivers have 16 outputs.In order to mount the led light driver, Surface Mount is used.With high reliability and efficiency, this emerges as a Linear.If the led driver ic is set to -40°C~125°C TA, it will work normally.Lighting benefits significantly from the program.A termination of 24 is used to operate the LED driver.It has a base of 24 pins.If the voltage supply is less than 3V, undetermined failures will occur.It consists of 16 segments.The mount is in the direction of Surface Mount.The LED driver is available under the part number STP16C.5.5V is a maximum acceptable voltage for the supply.In this device, the output voltage is 20V volts.The Display Drivers is also assigned based on its characteristics.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.This device is able to provide high efficiency when the maximal supply current should be less than 15.3mA.There is no current available to supply to the load.Having the switching frequency at 30MHz enables this electronic component to perform at its best.
STP16CPC26XTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
STP16CPC26XTR Applications
There are a lot of STMicroelectronics STP16CPC26XTR LED Driver ICs applications.
- A- lamps
- Medical surgery lighting
- Panel lighting
- LED headlights
- Down lights
- High-end retail lighting
- Other Electronic Devices
- LED Lightings for Industrial Equipment
- Amusement Machines
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
