STP16CPPS05PTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 40mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.73mm |
| Length | 8.66mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPPS05PTR Overview
24-SSOP (0.154, 3.90mm Width) package saves space on the board. LED drivers have a total of 16 outputs that are used in the design of the drivers.Surface Mount is used for mounting.There is no doubt that this is a very efficient and reliable Linear.The LED driver is capable of operating at a temperature of -40°C~125°C TA.This system operates at 30MHz frequency.It operates with 24 terminations.The base is configured with 24 pins.The voltage supply can fail if it is below 3V.The segment count is 16.It is mounted in the way of Surface Mount.Under the base part number STP16C, you will find this LED driver.It is acceptable to supply voltages of 5.5V.This device has an output voltage of 20V volts.The device has a pin count of 24.Moreover, it can be classified as Display Drivers due to its characteristics.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.When the maximum supply current is below 9.5mA, the device can deliver high efficiency.The current that can be supplied to the load is 40mA.
STP16CPPS05PTR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPPS05PTR Applications
There are a lot of STMicroelectronics STP16CPPS05PTR LED Driver ICs applications.
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
- Portable lighting
- High-end retail lighting
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- Amusement Machines
- Stage Lighting and Signage
