STP16CPPS05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
STP16CPPS05TTR Overview
There is also a 24-TSSOP (0.173, 4.40mm Width) package that is used to save space on the board. It has 16 outputs for LED drivers.We are using Surface Mount as the mounting method.In this case, the Linear emerges as highly efficient and reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.Using the frequency of 30MHz, it operates.For its operation, 24 terminations are designed.In this LED driver, the base is configured as 24.Undetermined failures will occur if the voltage supply is less than 3V.There are 16 segments.It is mounted in the way of Surface Mount.LED drivers have a base part number of STP16C.It is acceptable to supply voltages of 5.5V.A voltage of 20V is produced by it.The device has a pin count of 24.Furthermore, it can be classified as Display Drivers based on its characteristics.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.As long as the maximum supply current is less than 9.5mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 40mA current.
STP16CPPS05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPPS05TTR Applications
There are a lot of STMicroelectronics STP16CPPS05TTR LED Driver ICs applications.
- Gallery lighting
- Portable lighting
- Auxiliary lights for on-vehicle cameras
- LED headlights
- Linear fluorescent
- Amusement Machines
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
- Panel lighting
