STP16CPS05MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 100mA |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 100mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Max Output Voltage | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 6.35mm |
| Length | 12.7mm |
| Width | 12.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPS05MTR Overview
On the board, there is also a 24-SOIC (0.295, 7.50mm Width) package that saves space.There are 16 outputs used for the design of this LED drivers.The mounting method is Surface Mount.In this case, it emerges as a Linear with a high efficiency.When the temperature is -40°C~125°C TA, it can work normally.It operates using 24 terminations.With 24 pins at the base, this LED driver has a base configuration.The number of segments is 16.It has been mounted on Surface Mount.Part number STP16C represents this LED driver.5.5V is an acceptable maximum value for the supply voltage.On this device, there are 24 pins.In addition, it can also be categorized into Display Drivers based on its characteristics.When the input voltage is set to 3V, it operates.To meet highest efficiency standards, it works on a supply voltage of 3V.5.5V is the maximum value of supply current that can be used.If the maximum supply current is less than 11.7mA, the device is capable of providing high efficiency.You can supply 100mA current to the load.The electronic component can function fully when the switching frequency is maintained at 30MHz.When operating at the maximum output current of 100mA, it is capable of providing all the benefits associated with LED drivers.It is important that the output voltage does not exceed 20V.
STP16CPS05MTR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Switching frequency of 30MHz
STP16CPS05MTR Applications
There are a lot of STMicroelectronics STP16CPS05MTR LED Driver ICs applications.
- General lighting
- Refrigeration lighting
- Auxiliary lights for on-vehicle cameras
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Sports Facility Lighting
- Architectural lighting
- Linear fluorescent
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
