STP16CPS05TTR
| Parameters | |
|---|---|
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 80mA |
STP16CPS05TTR Overview
The 24-TSSOP (0.173, 4.40mm Width) package is used for saving board space. LED drivers with this design have 16 outputs.The led driver mounting is done by using Surface Mount.In this case, the result is a Linear with high efficiency.At -40°C~125°C TA, the led driver is capable of operating.It operates based on the frequency of 30MHz.In order for it to operate, it has 24 terminations.Its configuration is based on 24 pins.Undetermined failures will occur if the voltage supply is less than 3V.There are estimated to be 16 segments.It has been mounted on Surface Mount.STP16C is the base part number for this LED driver.It is acceptable to supply voltages of 5.5V.This device produces a voltage of 20V volts.In this device, there are 24 pins.Depending on its characteristics, it is classified into Display Drivers.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.It is capable of delivering high efficiency when the maximal supply current is below 11.7mA.100mA is the maximum current the load can handle.
STP16CPS05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
STP16CPS05TTR Applications
There are a lot of STMicroelectronics STP16CPS05TTR LED Driver ICs applications.
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- White LED Backlight for portable equipment
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- LED Lightings for Inspection Devices
- Replacement lamps
