STP16CPS05XTTR
| Parameters | |
|---|---|
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Max Supply Current | 11.7mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of LEDs | 1 |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 100mA |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
STP16CPS05XTTR Overview
24-TSSOP (0.173, 4.40mm Width) Exposed Pad saves board space. A LED driver using this design has 16 outputs.To mount, use Surface Mount.With high efficiency, it emerges as a Linear.When the temperature is -40°C~125°C TA, it can work normally.30MHz is the frequency in which it operates.A termination of 24 is used to operate the LED driver.The LED light driver has a base configuration of 24 pins.Undetermined failures may occur if the voltage supply falls below 3V.There are 16 segments in it.There is a mounting of it by Surface Mount.Under the base part number STP16C, you will find this LED driver.It is acceptable to have a maximum voltage of 5.5V.It has a voltage output of 20V.There are 24 pins on it.Additionally, it can be classified as Display Drivers based on its characteristics.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.It is possible to provide high efficiency when the maximal supply current is less than 11.7mA.The current that can be supplied to the load is 100mA.
STP16CPS05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
STP16CPS05XTTR Applications
There are a lot of STMicroelectronics STP16CPS05XTTR LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage Lighting and Signage
- Portable lighting
- LED Lightings for Inspection Devices
- Other Electronic Devices
- Replacement lamps
- LED Lightings for Industrial Equipment
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
