STP16DP05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 100mA |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Max Supply Current | 14.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 100mA |
| Low Level Output Current | 5mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16DP05TTR Overview
Additionally, there is a 24-TSSOP (0.173, 4.40mm Width) package for saving space.LED drivers design with 16 outputs.To mount, use Surface Mount.It is highly performing and reliable when it emerges as a Linear.It is possible for the led driver ic to function normally at -40°C~125°C TA.On the basis of the frequency 30MHz, it operates.The operation of this system is supported by 24 terminations.It is configured with 24 pins as its base.Undetermined failures can occur if the voltage supply is below 3V.There are estimated to be 16 segments.There is a mounting of it by Surface Mount.A base part number of STP16D is associated with this LED driver.An acceptable maximum value for the supply voltage is 5.5V.There is 20V voltage output from it.24 pins are included in it.Depending on its characteristics, it is classified into Display Drivers.It works with the minimal supply voltage of 3V to meet highest efficiency standards.It is possible to provide high efficiency when the maximal supply current is less than 14.5mA.The load is capable of receiving 100mA current.
STP16DP05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DP05TTR Applications
There are a lot of STMicroelectronics STP16DP05TTR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- OLED power supply for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Sports Facility Lighting
- Museum lighting
- Replacement lamps
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for Tablets and Note PCs
