STP16DP05XTTR
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Max Supply Current | 14.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 211.997734mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
STP16DP05XTTR Overview
It saves board space with the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers have a total of 16 outputs that are used in the design of the drivers.As far as mounting is concerned, Surface Mount is adopted.With high efficiency and reliable performance, it emerges as a Linear.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.It operates using 24 terminations.There are 24 pins on its base.16 segments are present.There is a mounting of it by Surface Mount.This LED driver has the part number STP16D.It is acceptable for the supply voltage to be 5.5V.20V is the output voltage.On it, there are 24 pins.In addition, it can be classified as Display Drivers according to its characteristics.At its minimal input voltage, it operates at 3V.A minimum supply voltage of 3V is required to meet the highest efficiency standards.In terms of supply current, 5.5V is the maximum value.It is capable of delivering high efficiency when the maximal supply current is below 14.5mA.100mA is the maximum current the load can handle.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.
STP16DP05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
STP16DP05XTTR Applications
There are a lot of STMicroelectronics STP16DP05XTTR LED Driver ICs applications.
- Panel lighting
- LED headlights
- Other Electronic Devices
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
