STP16DPP05MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16DPP05MTR Overview
As a result of its 24-SOIC (0.295, 7.50mm Width) package, it helps to save board space on the board. It has 16 outputs for LED drivers.In order to mount the led light driver, Surface Mount is used.This emerges as a Linear with high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TA.A frequency of 30MHz is used as the basis for operation.In order for it to operate, it has 24 terminations.This LED driver is configured with a base of 24 pins.A voltage supply less than 3V could result in undetermined failures.The number of segments is 16.It has been mounted on Surface Mount.This LED driver can be found under the base part number STP16D.5.5V is a maximum acceptable voltage for the supply.It has a voltage output of 20V.24 pins are included in it.Furthermore, it can be categorized as Display Drivers based on its characteristics.It works with the minimal supply voltage of 3V to meet highest efficiency standards.With a minimum supply current less than 9.5mA, this device achieves high efficiency.Loads can only be powered by 40mA current.Systems require 5V voltage to operate.
STP16DPP05MTR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Operating with the supply voltage of 5V
STP16DPP05MTR Applications
There are a lot of STMicroelectronics STP16DPP05MTR LED Driver ICs applications.
- Refrigeration lighting
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
- Down lighting
- Amusement Machines
- Gallery lighting
- Other Electronic Devices
- LED headlights
- White LED Backlight for portable equipment
- LED Lightings for Inspection Devices
