STP16DPP05TTR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 40mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
STP16DPP05TTR Overview
In order to save board space, the 24-TSSOP (0.173, 4.40mm Width) package is used. LED drivers design with 16 outputs.Surface Mount is used to mount the led light driver.It emerges as a Linear, which is efficient and reliable.The led light driver can work at -40°C~125°C TA.30MHz is the frequency in which it operates.It operates with 24 terminations.The base of this board is configured as 24 pins.Undetermined failures may occur when the voltage supply is less than 3V.The number of segments is estimated to be 16.There is a mounting of it by Surface Mount.The base part number for this LED driver is STP16D.There is no problem with the voltage of 5.5V.20V is the output voltage.A total of 24 pins are present on this device.In addition, it can be classified as Display Drivers according to its characteristics.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.Whenever the supply current is lower than 9.5mA, it can provide high efficiency.40mA is the maximum current the load can handle.
STP16DPP05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DPP05TTR Applications
There are a lot of STMicroelectronics STP16DPP05TTR LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- Amusement Machines
- Other Electronic Devices
- Street lighting
- High-end retail lighting
- Down lighting
- Museum lighting
- Panel lighting
- Dimmable LED for vehicle interiors
