STP16DPP05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16DPP05XTTR Overview
Its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used to save board space. 16 outputs are designed into LED drivers.This mounting method is Surface Mount.It emerges as a Linear, which is efficient and reliable.The led light driver is capable of operating at the operating temperature of -40°C~125°C TA.On the basis of the frequency 30MHz, it operates.There are 24 terminations associated with it.Its configuration is based on 24 pins.A voltage supply less than 3V could result in undetermined failures.It is estimated that there are 16 segments.The mount is in the way of Surface Mount.Under the base part number STP16D, you'll find this LED driver.It is acceptable for the supply voltage to be 5.5V.The voltage at the output terminal is 20V.In this device, there are 24 pins.The Display Drivers is also assigned based on its characteristics.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.When the maximum supply current is less than 9.5mA, this device is capable of providing high efficiency.There is no current that can be supplied to the load.
STP16DPP05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DPP05XTTR Applications
There are a lot of STMicroelectronics STP16DPP05XTTR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Panel lighting
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Refrigeration lighting
- Scanners and Handy Terminals
- Medical surgery lighting
