STP16DPPS05MTR
| Parameters | |
|---|---|
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9.5mA |
| Output Current | 40mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | STP16D |
| Pin Count | 24 |
STP16DPPS05MTR Overview
24-SOIC (0.295, 7.50mm Width) package saves space on the board. As part of the design of this LED driver, there are 16 outputs that have been used.For mounting, it uses the Surface Mount method.There is no doubt that this is a very efficient and reliable Linear.If the led driver ic is set to -40°C~125°C TA, it will work normally.As a result, it operates on the basis of frequency 30MHz.It is designed to work with 24 terminations.The LED light driver has a base configuration of 24 pins.A voltage supply less than 3V will cause undetermined failures.16 segments are present.On the Surface Mount, a device is mounted.It can be found under the part number STP16D.It is acceptable to supply voltages of 5.5V.This device produces a voltage of 20V volts.24 pins are used on the device.As a result, it can also be classified as Display Drivers.It works with the minimal supply voltage of 3V to meet highest efficiency standards.When the maximum supply current is below 9.5mA, the device can deliver high efficiency.It is possible to supply the load with 40mA current.
STP16DPPS05MTR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DPPS05MTR Applications
There are a lot of STMicroelectronics STP16DPPS05MTR LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
- Refrigeration lighting
- OLED power supply for portable equipment
- Portable lighting
- A- lamps
- Stage and Studio lighting
- Linear fluorescent
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
