STP16DPPS05TTR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9.5mA |
| Output Current | 40mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16DPPS05TTR Overview
The 24-TSSOP (0.173, 4.40mm Width) package conserves board space. LED drivers design with 16 outputs.It is possible to mount the led driver using Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.At -40°C~125°C TA, the led driver is capable of operating.Using the frequency of 30MHz, it operates.It is designed to work with 24 terminations.Its configuration is based on 24 pins.A voltage supply less than 3V could result in undetermined failures.It consists of 16 segments.This is mounted by Surface Mount.Under the base part number STP16D, you will find this LED driver.It's acceptable for the voltage to be 5.5V.There is 20V voltage output from it.In addition, it is equipped with a total of 24 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.There is no current available to supply to the load.
STP16DPPS05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DPPS05TTR Applications
There are a lot of STMicroelectronics STP16DPPS05TTR LED Driver ICs applications.
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- Gallery lighting
- Linear fluorescent
- Refrigeration lighting
- A- lamps
- LED Lightings for Industrial Equipment
- Architectural lighting
- LED Lighting PFCs, Linear Dimmable
