STP16DPPS05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9.5mA |
| Output Current | 40mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16DPPS05XTTR Overview
The 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. This LED driver has 16 outputs.The mounting method is Surface Mount.When it emerges as a Linear, it performs extremely well and is highly reliable.The led light driver is capable of working normally at -40°C~125°C TA.The frequency of 30MHz is used as the basis for its operation.It is designed to work with 24 terminations.The LED light driver is configured with a base of 0 pins.There may be undetermined failures if the voltage supply falls below 3V.There are 16 segments.I have mounted it by Surface Mount.The LED driver is available under the part number STP16D.A maximum supply voltage of 5.5V is acceptable.A voltage output of 20V is provided by this device.It is equipped with 24 pin count.Further, its characteristics allow it to be classified as Display Drivers.For maximum efficiency, it requires a minimal supply voltage of 3V.40mA is the maximum amount of current that can be supplied to the load.
STP16DPPS05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16DPPS05XTTR Applications
There are a lot of STMicroelectronics STP16DPPS05XTTR LED Driver ICs applications.
- Panel lighting
- White LED Backlight for portable equipment
- Scanners and Handy Terminals
- Stage and Studio lighting
- LED Lighting PFCs, Linear Dimmable
- Medical surgery lighting
- Flicker-free LED Lighting using R1580N
- LED headlights
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
