STP16DPS05XTTR
| Parameters | |
|---|---|
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP16D |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
STP16DPS05XTTR Overview
As a result of its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, it helps to save board space on the board. LED drivers use 16 outputs for their design.It adopts the way of Surface Mount for mounting.Linear emerges with high efficiency and reliability.-40°C~125°C TA is a valid operating temperature for the led driver.Based on the frequency of 30MHz, it operates on the basis of a pulse.The system operates with a termination of 0.A configuration of this chip is made up of 24 pins.It is likely that undetermined failures will occur if the voltage supply is less than 3V.There are 16 segments.It is mounted in the way of Surface Mount.The LED driver is based on part number STP16D.It is acceptable to have a maximum voltage of 5.5V.The output voltage is 20V.24 pins are included in it.The Display Drivers is also assigned based on its characteristics.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.100mA is the maximum amount of current that can be supplied to the load.
STP16DPS05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
STP16DPS05XTTR Applications
There are a lot of STMicroelectronics STP16DPS05XTTR LED Driver ICs applications.
- Down lighting
- Stage and Studio lighting
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- Industrial LED Lighting: Image Recognition Devices
- A- lamps
- Street lighting
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- LED headlights
