STP24DP05BTR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP24D |
| Pin Count | 48 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Output Current | 80mA |
| Max Supply Current | 40mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 10mA |
| Low Level Output Current | -10mA |
| Number of Segments | 24 |
| Switching Frequency | 25MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP24DP05BTR Overview
There is a 48-TQFP Exposed Pad package on the board that is used to save space. Using this LED driver, there are 24 outputs.The led light driver is mounted using Surface Mount.It emerges as a Linear with high efficiency.The led light driver is capable of operating at the operating temperature of -40°C~125°C TA.For its operation, terminations with a value of 0 are used.To form its configuration, there are 48 pins.There are estimated to be 24 segments.It has been mounted on Surface Mount.It's under the STP24D base part number.It is acceptable to supply voltages of 5.5V volts.20V is the voltage output.In addition, it has 48 pins.Additionally, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.It reaches 5.5V when the maximum supply current is allowed.If the maximum supply current is less than 40mA, the device is capable of providing high efficiency.There is no current that can be supplied to the load.It's possible for this electronic component to fully function when the switching frequency is maintained at 25MHz.
STP24DP05BTR Features
Available in the 48-TQFP Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 25MHz
STP24DP05BTR Applications
There are a lot of STMicroelectronics STP24DP05BTR LED Driver ICs applications.
- Stage Lighting and Signage
- Flicker-free LED Lighting using R1580N
- LED headlights
- Refrigeration lighting
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for portable equipment
- Amusement Machines
- Replacement lamps
- Panel lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
