STPM10BTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3.165V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STPM10 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3.165V |
| Number of Channels | 2 |
| Interface | SPI, Serial |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 5mA |
| Supply Current-Max (Isup) | 6mA |
| Input Impedance | 100kOhm |
| Meter Type | Single Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 1.5V |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STPM10BTR Overview
Tape & Reel (TR)ipped up in a box. This package has the 20-TSSOP (0.173, 4.40mm Width) extension. It can be used as a Single Phase meter. Available in Surface Mount. There is a higher operating temperature at -40°C~85°C. Power is supplied by 3.165V~5.5V power supply, which allows it to operate. The following parts are also available on STPM10 if you are interested in finding more. A voltage of 0.8V is present on the low-level I/O ports of this PMIC. This device displays a voltage of 1.5V for high-level I/Os. It includes 20 terminations. This PMIC ANALOG CIRCUITIC is powerful. For this part, the normal voltage needed is 5V. It is important to note that this device requires a voltage of 3.165V or higher to operate. In order to keep the maximum voltage that goes to the device under 5.5V, the voltage should be kept as low as possible. Joined 20 pins are present. Logic gate applications are made possible by this 20 solution. It is designed as a Surface Mount device for easy install and dismount. This is a Other Analog ICs for specialized needs. The maximum supply current is recommended to be set at 5mA in order to make sure the PMIC keeps running normally. Generally, the device requires a power supply with a 5V rating. The memory chip can't run at a higher voltage than 6mA. This logic device has implemented 2 channels.
STPM10BTR Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
2 channels.
STPM10BTR Applications
There are a lot of STMicroelectronics STPM10BTR Energy Metering ICs applications.
- Power Monitoring for Home Automation
- Power monitoring/power budgeting
- Real-Time Measurement of Input Power for AC/DC Supplies
- Base Station Power Distribution Systems
- Intelligent Power Distribution Units
- PCs/servers
- Industrial Lighting Power Monitoring
- Telecom Infrastructure
- Server Backplane Systems
- Power monitoring instruments
