STSR2PCD-TR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR2 |
| Pin Count | 8 |
| Output Voltage | 160mV |
| Power Supplies | 5V |
| Power Dissipation | 270mW |
| Propagation Delay | 130 ns |
| Quiescent Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 30ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 3.5A |
| High Side Driver | NO |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
STSR2PCD-TR Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Cut Tape (CT) is indicated.This configuration includes 2 drivers.Its recommended mounting way is Surface Mount.A supply voltage of 4.5V~5.5V demonstrates its superiority.There is a gate type of N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.There are 8 terminations to form the base of its configuration.There are numerous related parts listed under its base part number STSR2.The device is mounted with Surface Mount.When the device is designed, it has 8 pins.In addition, it is specifically designed to operate with a supply voltage of 5V.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.Within this subcategory of MOSFET Drivers, there are several useful electronic components.There are 8 component pins on the board.The power supply 5V of the product solves the power supply problem for a variety of applications.Mosfet gate drivers outputs 160mV as voltage.The frequency of 750kHz can result in an improvement in efficiency.Its quiescent current at 3mA is the current it consumes when not affected by external factors.
STSR2PCD-TR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 3mA
STSR2PCD-TR Applications
There are a lot of STMicroelectronics STSR2PCD-TR gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Pulse transformer drivers
- Commercial and agricultural vehicles (CAV)
- Video amplifiers
- Motor Drives
- Power factor correction (PFC) circuits
- Industrial Modules
- Solar inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
