STSR30D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 275mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR30 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 275mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Input Voltage (Min) | 4V |
| Topology | Flyback |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 40ns 40ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STSR30D Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.There is a package in the form of Tube.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4V~5.5V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number STSR30.Mounting the device requires Surface Mount.When the device is designed, it has 8 pins.In the maximum case, the output current can be limited to 1.5A.The board has 8 component pins.275mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.The frequency of 500kHz can be used to improve efficiency.Mosfet driver ic adopts SWITCHING CONTROLLER as Mosfet driver ics analog IC.
STSR30D Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 275mW
STSR30D Applications
There are a lot of STMicroelectronics STSR30D gate drivers applications.
- PCMCIA applications
- Dual-Battery Systems
- General Purpose 3-Phase Inverter
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for Motor Control
- Industrial Modules
- Uninterruptible Power Supplies (UPS)
- AC-DC Inverters
- Portable Media Players
