STSR30D-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 275mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Reach Compliance Code | compliant |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR30 |
| Pin Count | 8 |
| Output Voltage | 450mV |
| Max Output Current | 1.5A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 275mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Input Voltage (Min) | 4V |
| Topology | Flyback |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 40ns 40ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| Lead Free | Lead Free |
STSR30D-TR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Cut Tape (CT) is the form of the package.There are 1 drivers installed for this device.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 4V~5.5V supply voltage, its superiority can be demonstrated.This gate type has a N-Channel MOSFET design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.Under its base part number STSR30, various related parts can be found.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is possible to achieve a maximum output current of 1.5A.The board contains 8 pins for component connections.This device has a maximum power dissipation of 275mW, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 4.5mA.A voltage of 450mV is output by this device.By using the frequency 500kHz, we can increase efficiency.In the analog circuit, it uses IC SWITCHING CONTROLLER.
STSR30D-TR Features
Embedded in the Cut Tape (CT) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 275mW
STSR30D-TR Applications
There are a lot of STMicroelectronics STSR30D-TR gate drivers applications.
- Portable Navigation Devices
- Isolated Supplies for controller area network (CAN),
- High-voltage isolated DC-DC converters
- General Purpose 3-Phase Inverter
- Portable computers
- serial peripheral interface (SPI), I2C
- Multicolor LED/laser displays
- Video amplifiers
- UPS systems
- Refrigerator
