STSR3CD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 270mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR3 |
| Pin Count | 8 |
| Output Voltage | 4.85V |
| Max Output Current | 3.5A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 270mW |
| Output Current | 200mA |
| Max Supply Current | 20mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Output Power | 270mW |
| Turn On Delay Time | 50 ns |
| Input Voltage (Min) | 4V |
| Topology | Flyback |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 30ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 3.5A |
| Switching Frequency | 750kHz |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
STSR3CD Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tube represents the package.Configuration is supported by 1 drivers.Surface Mount is the way in which it is mounted.By using 4V~5.5V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.-40°C~125°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number STSR3.Devices are mounted by Surface Mount.As a result, it is configured with 8 pins when it is designed.There is an output current limit of 3.5A for this device.On the board, there are 8 component pins.Mosfet gate drivers supports a current output of 200mA.This device has a maximum power dissipation of 270mW, indicating that it is capable of reducing power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 20mA.In this case, it produces a voltage of 4.85V.A higher frequency of 750kHz will improve efficiency.The analog IC it uses is SWITCHING CONTROLLER in the design.
STSR3CD Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 270mW
STSR3CD Applications
There are a lot of STMicroelectronics STSR3CD gate drivers applications.
- Power factor correction (PFC) circuits
- Motor Control
- High-speed communications
- Industrial Power Supplies
- PCMCIA applications
- Broadcast equipment
- High frequency line drivers
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active filtering
