STSR3CD-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 270mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR3 |
| Pin Count | 8 |
| Output Voltage | 160mV |
| Max Output Current | 3.5A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 270mW |
| Max Supply Current | 20mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Input Voltage (Min) | 4V |
| Topology | Flyback |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 30ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 3.5A |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
STSR3CD-TR Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tape & Reel (TR) is indicated.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Surface Mount is the way in which it is mounted.WGate driversh a 4V~5.5V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Non-Inverting is the input type used in this program.It's configured with 8 terminations.You will find various related parts under the base part number STSR3.The device is mounted using Surface Mount.A total of 8 pins are available on the device.In the maximum case, the output current can be 3.5A volts.A total of 8 pins are available for component connections.Considering its maximum power dissipation, 270mW shows its maximum capacity to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 20mA.The voltage it outputs is 160mV.The frequency of 750kHz can be adjusted in order to improve efficiency.As an analog IC, it utilizes SWITCHING CONTROLLER.
STSR3CD-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 270mW
STSR3CD-TR Applications
There are a lot of STMicroelectronics STSR3CD-TR gate drivers applications.
- Motor Controls
- Broadcast equipment
- High power buffers
- Isolated Supplies for controller area network (CAN),
- Motor Control
- High frequency line drivers
- Pulse transformer drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Solar power supplies
- Refrigerator
