banner_page

STW81102AT

Frequency Synthesizer (RF) 4.65GHz STW81102 Clock Generators 28 Pins 28-VFQFN Exposed Pad 28 Terminals Surface Mount 3V~3.6V Tray


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STW81102AT
  • Package: 28-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 929
  • Description: Frequency Synthesizer (RF) 4.65GHz STW81102 Clock Generators 28 Pins 28-VFQFN Exposed Pad 28 Terminals Surface Mount 3V~3.6V Tray (Kg)

Details

Tags

Parameters
Packaging Tray
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Type Frequency Synthesizer (RF)
Terminal Finish Matte Tin (Sn) - annealed
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STW81102
Output Clock, Crystal
Pin Count 28
Number of Outputs 1
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Nominal Supply Current 90mA
Frequency (Max) 4.65GHz
Input Clock, Crystal
Ratio - Input:Output 3:2
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 5mm
Width 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-VFQFN Exposed Pad
Number of Pins 28
Operating Temperature -40°C~85°C

STW81102AT Overview


Clock ICs are packaged using the Tray method. As part of the 28-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains a total of 28 terminations within RF synthesizer. In this case, Clock, Crystal is designed to be the input of the clock generator. An up to 4.65GHz frequency is provided by this clock-based RF synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.6V of power. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock PLL works with 3V~3.6V supply voltage provided. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock, Crystal logic levels. This is an electronic part that can be classified as a Frequency Synthesizer (RF) in this case. The clock-generating IC is a 28-bit device designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number STW81102. PLL is designed with 28 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs.

STW81102AT Features


Available in the 28-VFQFN Exposed Pad
Operating supply voltage of 3.3V

STW81102AT Applications


There are a lot of STMicroelectronics STW81102AT Clock Generators applications.

  • Walkie-talkies
  • Modems
  • Test equipment
  • Local oscillator source in receiver
  • Antenna automatic tracking
  • Cell phones
  • Simple clock clean-up circuits
  • DVD recorders
  • Laptops
  • Closed circuit systems

Write a review

Note: HTML is not translated!
    Bad           Good