SW06GSZ
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SW06 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 0V |
| Power Dissipation | 165mW |
| Max Supply Current | 9mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 700 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 12V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 58 dB |
| Current - Leakage (IS(off)) (Max) | 60nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 5.5pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 700ns, 500ns |
| Channel-to-Channel Matching (ΔRon) | 30 Ω |
| Crosstalk | -70dB @ 500kHz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 150Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIMOS |
| Terminal Form | GULL WING |
SW06GSZ Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Using the SW06 search parameter, you can discover variants of the switch. A 150Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. A voltage higher than 36V should not normally be supplied to the switches. Analog switch ics with Dual, Single supply type are cost-effective. There should be 0V voltage fed to the electrical part below 0V. Putting voltage greater than 9mA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. For dual power supplies, a voltage of at least 12V should be attached.
SW06GSZ Features
4 Channels
Switch Circuit: SPST - NO/NC
SW06GSZ Applications
There are a lot of Analog Devices Inc. SW06GSZ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Avionics test equipment
- Video signal routing
- Cross Connects
- Fiber to the Home
- Cable Modem
- Multi-Line E1 Interface Cards
- Isolation
- Industrial
- Audio and video routing
