Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
150Ohm |
Terminal Finish |
Matte Tin (Sn) |
Technology |
BIMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
SW06 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
4 |
Max Supply Voltage |
36V |
Min Supply Voltage |
0V |
Operating Supply Current |
6mA |
Power Dissipation |
165mW |
Max Supply Current |
9mA |
Throw Configuration |
SPST |
Turn On Delay Time |
700 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
500 ns |
Max Dual Supply Voltage |
18V |
On-State Resistance (Max) |
150Ohm |
Min Dual Supply Voltage |
12V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
58 dB |
Current - Leakage (IS(off)) (Max) |
60nA |
Channel Capacitance (CS(off), CD(off)) |
7pF 5.5pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
700ns, 500ns |
Channel-to-Channel Matching (ΔRon) |
30 Ω |
Crosstalk |
-70dB @ 500kHz |
Height Seated (Max) |
2.65mm |
Length |
10.3mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SW06GSZ-REEL Overview
Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO/NC switching circuits. There are 4 circuits in this switch device. Try searching with SW06 to find analog multiplexer variants. As far as internal resistance is concerned, it has 150Ohm. For details about the functions of 16 pins, please refer to the datasheets. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 0V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 6mA. If put voltage greater than 9mA on the device, damage may be caused to the analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. A dual power supply should have at least 12V voltage attached.
SW06GSZ-REEL Features
1 Channels
Switch Circuit: SPST - NO/NC
6mA Supply Current
SW06GSZ-REEL Applications
There are a lot of Analog Devices Inc. SW06GSZ-REEL Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Audio and video switching
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Industrial and process control systems
- Public switching systems
- Avionics test equipment
- Channelized and Unchannelized DS3 applications
- ATM
- RGB switches
- PBXs