SY100EL31ZG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | 100EL |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -4.2V~-5.5V |
| Frequency | 2.8GHz |
| Base Part Number | 100EL31 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.2V |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 475 ps |
| Quiescent Current | 32mA |
| Turn On Delay Time | 645 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY100EL31ZG Overview
It is packaged in the way of 8-SOIC (0.154, 3.90mm Width). As part of the package Tube, it is embedded. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a -4.2V~-5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 100ELseries contain this type of chip. Its output frequency should not exceed 2.8GHz. A total of 1elements are present in it. There is 32mA quiescent consumption. This D latch belongs to the family of 100EL31. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 8 pins. A Positive Edgeclock edge trigger is used in this device. 1bits are used in its design. The superior flexibility of this circuit is achieved by using 1 circuits. In order to operate, the chip has 1 output lines. This input has 1lines. There is a consumption of 32mAof quiescent current from it. The operating temperature should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The system operates with a minimum supply voltage of 4.2V. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to achieve 2.8GHz frequencies.
SY100EL31ZG Features
Tube package
100EL series
8 pins
1 Bits
SY100EL31ZG Applications
There are a lot of Microchip Technology SY100EL31ZG Flip Flops applications.
- Frequency division
- Memory
- Consumer
- Supports Live Insertion
- Matched Rise and Fall
- Divide a clock signal by 2 or 4
- Pattern generators
- Control circuits
- Latch-up performance
- Power down protection
