SY100EL35ZG-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -4.2V~-5.5V |
| Frequency | 2.2GHz |
| Base Part Number | 100EL35 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | -5.5V |
| Min Supply Voltage | -4.2V |
| Number of Bits | 1 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 745 ps |
| Quiescent Current | 32mA |
| Turn On Delay Time | 745 ps |
| Current - Quiescent (Iq) | 32mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SY100EL35ZG-TR Overview
8-SOIC (0.154, 3.90mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. This output is configured with Differential. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of -4.2V~-5.5V is required for operation. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 100EL series. A frequency of 2.2GHzshould be the maximum output frequency. A total of 1 elements are present. T flip flop consumes 32mA quiescent energy. This D latch belongs to the family of 100EL35. Electronic part Surface Mountis mounted in the way. This board is designed with 8pins on it. There is a clock edge trigger type of Positive Edgeon this device. This flip flop is designed with 1 Bits. There is a consumption of 32mAof quiescent current from it. The operating temperature should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is -4.2V. A maximum voltage of -5.5V can be provided by it. It is possible to achieve a frequency of 2.2GHz.
SY100EL35ZG-TR Features
Tape & Reel (TR) package
100EL series
8 pins
1 Bits
SY100EL35ZG-TR Applications
There are a lot of Microchip Technology SY100EL35ZG-TR Flip Flops applications.
- Consumer
- CMOS Process
- Convert a momentary switch to a toggle switch
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- Single Down Count-Control Line
- Power down protection
- Counters
- Frequency division
- Common Clocks
