SY100EL52ZG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Quiescent Current | 25mA |
| Turn On Delay Time | 515 ps |
| Trigger Type | Positive, Negative |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.93mm |
| Width | 3.94mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY100EL52ZG Overview
The flip flop is packaged in 8-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive, Negative. This electronic part is mounted in the way of Surface Mount. A voltage of -4.2V~-5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 100ELseries contain this type of chip. You should not exceed 2.8GHzin its output frequency. There are 8 terminations,The 100EL52family includes it. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. There is a clock edge trigger type of Positive Edgeon this device. The design is based on 1bits. To achieve this superior flexibility, 1 circuits are used. There is 25mA quiescent current consumption by it.
SY100EL52ZG Features
Tube package
100EL series
8 pins
1 Bits
SY100EL52ZG Applications
There are a lot of Microchip Technology SY100EL52ZG Flip Flops applications.
- Frequency Divider circuits
- Reduced system switching noise
- Digital electronics systems
- Memory
- Registers
- ATE
- EMI reduction circuitry
- Safety Clamp
- ESCC
- Individual Asynchronous Resets
