SY100ELT25ZG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100ELT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100ELT25 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 1 |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 3.6 ns |
| Logic Function | Translator |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Negative Supply Voltage-Nom | -4.5V |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | ECL |
| Output Latch or Register | NONE |
| Length | 4.93mm |
| Width | 3.94mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
SY100ELT25ZG Overview
In the 8-SOIC (0.154, 3.90mm Width) package, it is embedded.Tube is the packaging method.Non-Inverted is used for the output it is configured with.Level translators has the translator type Mixed Signal.Surface Mount is the method used for mounting this electronic part.Level translators has the Channel type Unidirectional.Level translators is -40°C~85°C TA at the operating temperature.Its superior flexibility is achieved by using 1 circuits.0 terminations are used to end transmission lines.Parts that are related to 100ELT25 can be identified based on its base part number.This device is powered by a supply voltage of 5V which is applied to it.The device is a member of the 100ELT series.Designed with 8 pins, it is compatible with a wide range of devices.An electronic part with 1 bits is designed.5.5V is the maximum voltage it supports.A minimal voltage of 4.5V is needed to operate it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Featuring a 24mA output current, its design flexibility is maximized.Optimal efficiency requires 5V as the supply voltage.
SY100ELT25ZG Features
8-SOIC (0.154, 3.90mm Width) package
1 circuits
100ELT series
8 pins
SY100ELT25ZG Applications
There are a lot of Microchip Technology SY100ELT25ZG voltage translators & level shifters applications.
- Extended Product-Change Notification
- Signaling Level Conversion for Clock or Data
- Telecommunications
- Debouncing a Mechanical Switch
- Extended Product Life Cycle
- Monitors
- SDIO
- Handset
- Industrial Equipment
- Product Traceability
