SY100EP16UKG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.375V~3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP16 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Nominal Supply Current | 25mA |
| Logic Function | Receiver |
| Data Rate | 2.5 Gbps |
| Logic Type | Differential Receiver/Driver |
| Differential Output | YES |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Number of Transceivers | 1 |
| Receive Delay-Max | 0.33 ns |
| Transmit Delay-Max | 0.33 ns |
| Height | 920μm |
| Length | 3mm |
| Width | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
SY100EP16UKG Overview
A packaging method based on Tube is employed.You can find it in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It is necessary to supply voltage 2.375V~3.6V to ensure that the device is capable of operating normally.It is a type of electronic part mounted in the manner of Surface Mount.An operating temperature of -40°C~85°C has been set for the device.The electronic parts belonging to the 100EP series offer a number of similarities.Parts related to the base part number 100EP16 can be found.Using 8 terminations, signals are prevented from reverberating off the end of the transmission line.A Surface Mount mounting method is used.In its construction, there are 8 pins.It is possible to keep normal use when the minimum supply voltage is set to 2.375V.The maximum supply voltage of 3.6V is sufficient for normal use.The interface IC type is LINE TRANSCEIVER.
SY100EP16UKG Features
SY100EP16UKG Applications
There are a lot of Microchip Technology SY100EP16UKG Specialty Logic ICs applications.
- Metro access rings
- Satellite communications networks
- LAN, SAN, WAN (local, storage, work area networks)
- Single to Multimode Fiber Conversion
- Cell phones
- Broadcast application
- Low power, low voltage systems
- Vehicle, ship, aircraft navigation and positioning
- Wireless transmission
- Structural bonding
