SY100EPT21LKG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EPT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EPT21 |
| Number of Outputs | 1 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.8V |
| Min Supply Voltage | -500mV |
| Nominal Supply Current | 14mA |
| Number of Bits | 1 |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Logic Function | Translator |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | LVTTL |
| Translator Type | Mixed Signal |
| Input Signal | LVPECL |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY100EPT21LKG Overview
In the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it can be found.Tube is the way in which it is packaged.This output is configured with Non-Inverted.Its translator type is Mixed Signal.Surface Mount is the way in which this electronic part is mounted.A Unidirectional channel type is associated with this electrical device.The operating temperature is -40°C~85°C TA.When it comes to terminating a transmission line, there are 8 terminations.Based on this base part number 100EPT21, its related parts can be identified.The supply voltage of this device is 3.3V, and it is powered by it.In terms of its design, it is a member of the 100EPT series.The board has 8 pins.This electronic part is designed with 1 Bits.Voltages up to 3.8V can be supplied.In order for the machine to operate, the supply voltage must be -500mV.With the Surface Mount method, it is mounted.Optimal efficiency requires 3.3V as the supply voltage.Outputs are set to 1.
SY100EPT21LKG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
100EPT series
8 pins
1 outputs
SY100EPT21LKG Applications
There are a lot of Microchip Technology SY100EPT21LKG voltage translators & level shifters applications.
- Desktop PC
- Routers (routing equipment)
- Personal Electronics
- Controlled Baseline
- PMBus
- One Assembly and Test Site
- TVs
- Notebook
- Extended Product Life Cycle
- MDIO
