SY100EPT21LKG-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 100EPT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EPT21 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.8V |
| Min Supply Voltage | -500mV |
| Nominal Supply Current | 14mA |
| Number of Bits | 1 |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 1.9 ns |
| Logic Function | Translator |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | LVTTL |
| Translator Type | Mixed Signal |
| Input Signal | LVPECL |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SY100EPT21LKG-TR Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is now available to you.Packaged as Tape & Reel (TR).Level translators is configured wlevel translatorsh an output of Non-Inverted.This electrical device has a translator type of Mixed Signal.Surface Mount is the way in which this electronic part is mounted.This electrical device has channel type Unidirectional.There is -40°C~85°C TA operating temperature.Ending a transmission line involves 8 terminations.A series of related parts can be derived from the base part number 100EPT21.Level translators is powered from a supply voltage of 3.3V.There are a number of devices in the 100EPT series.There are 8 pins on it.The design of this electronic part contains 1 bits.Voltages above 3.8V are supported.In order for the machine to operate, the supply voltage must be -500mV.Level translators has been mounted wLevel translatorsh the method of Surface Mount.There are a total of 1 channels.The supply voltage should be maintained at 3.3V for high efficiency.
SY100EPT21LKG-TR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
100EPT series
8 pins
SY100EPT21LKG-TR Applications
There are a lot of Microchip Technology SY100EPT21LKG-TR voltage translators & level shifters applications.
- Debouncing a mechanical switch
- One Assembly
- Motor Drives
- I2C
- Enterprise and communications
- SMBus
- Test Site
- Smartphone
- Monitors
- Routers (Telecom Switching Equipment)
