SY100EPT23LKG

Surface Mount 8 pinsTube 3.3V VVoltage Translators & Level Shifters 1 Mixed Signal 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Active 8 Weeks Weeks3 (168 Hours)

Manufacturer: Microchip Technology
Nocochips NO: 536-SY100EPT23LKG
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 159
Description: Surface Mount 8 pinsTube 3.3V VVoltage Translators & Level Shifters 1 Mixed Signal 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Active 8 Weeks Weeks3 (168 Hours) (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Supplier Device Package	8-MSOP
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
Series	100EPT
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	100EPT23
Output Type	Non-Inverted
Operating Supply Voltage	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	3.6V
Min Supply Voltage	3V
Nominal Supply Current	30mA
Number of Bits	2
Propagation Delay	2.5 ns
Turn On Delay Time	2.5 ns
Logic Function	Translator
High Level Output Current	-3mA
Channel Type	Unidirectional
Low Level Output Current	24mA
Output Signal	LVTTL
Translator Type	Mixed Signal
Input Signal	LVPECL
Channels per Circuit	2
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SY100EPT23LKG Overview

Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) includes it.A Tube package is used to package it.Level translators is configured wlevel translatorsh an output of Non-Inverted.There is Mixed Signal translator type for this electrical device.Surface Mount is the method used for mounting this electronic part.Unidirectional is the type of channel for this electrical device.During operation, the temperature is set to -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.Parts that are related to 100EPT23 can be identified based on its base part number.Level translators belongs to the series 100EPT.In addition, it is designed with a pin number of 8.The design of this electronic part is based on 2 bits.3.6V is the maximum supply voltage it can handle.A minimal voltage of 3V is needed to operate it.Mounting this electronic component is done using the Surface Mount method.Channel count is 2.High efficiency requires a supply voltage of 3.3V.Level translators is recommended to operate at a temperature higher than -40°C.Ideally, the temperature should not be higher than 85°C.