SY100EPT28LKG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EPT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EPT28 |
| Output Type | Differential, Single-Ended |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Number of Bits | 1 |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Logic Function | Translator |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | LVTTL, LVPECL |
| Translator Type | Mixed Signal |
| Input Signal | LVPECL, LVTTL |
| Channels per Circuit | 2 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SY100EPT28LKG Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is now available to you.Tube is the way in which it is packaged.This output uses Differential, Single-Ended.Translator type Mixed Signal is associated with this electrical device.Electronic parts are mounted using the Surface Mount method.This electrical device has a Channel type of Unidirectional.Operation is performed at -40°C~85°C TA.Due to its superior flexibility, it uses 1 circuits.0 terminations are used to end transmission lines.Level translators is possible to determine Level translatorss related parts using the base part number 100EPT28.A supply voltage of 3.3V is used to power the device.This is a device from the 100EPT series.The 8 pins are designed into it.Electronic parts with 1 bits are designed for this application.Voltages above 3.6V are supported.The minimal voltage for operation is 3V.Mounting this electronic component is done using the Surface Mount method.High efficiency requires a voltage supply of 3.3V.
SY100EPT28LKG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
100EPT series
8 pins
SY100EPT28LKG Applications
There are a lot of Microchip Technology SY100EPT28LKG voltage translators & level shifters applications.
- Product Traceability
- Controlled Baseline
- Eliminate slow or noisy input signals
- Personal Electronics
- Electronic Points of Sale
- Power-sensitive applications
- One Fabrication Site
- One Fabrication Site
- I2C / SMBus
- Controlled Baseline
