SY10EL31ZG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EL |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Voltage - Supply | -4.75V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10EL31 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 645 ps |
| Quiescent Current | 32mA |
| Turn On Delay Time | 645 ps |
| Logic Function | AND |
| Trigger Type | Positive Edge |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SY10EL31ZG Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. D flip flop is embedded in the Tube package. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to -4.75V~-5.5V. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 10EL series. It should not exceed 2.8GHzin terms of its output frequency. In total, it contains 1 elements. Terminations are 8. The object belongs to the 10EL31 family. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. In this device, the clock edge trigger type is Positive Edge. This flip flop is designed with 1 Bits. In terms of quiescent current, it consumes 32mA .
SY10EL31ZG Features
Tube package
10EL series
8 pins
1 Bits
SY10EL31ZG Applications
There are a lot of Microchip Technology SY10EL31ZG Flip Flops applications.
- Common Clocks
- Test & Measurement
- Guaranteed simultaneous switching noise level
- Frequency Dividers
- 2 – Bit synchronous counter
- Data storage
- Data transfer
- QML qualified product
- Buffer registers
- ESD protection
