SY10ELT28KI-TR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | 10ELT |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO TRUE AS O/P POLARITY FOR DIFF PECL TO TTL AS DEFAULT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 10ELT28 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Output Type | Differential |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Output Polarity | COMPLEMENTARY |
| Interface IC Type | PECL-TTL/TTL-PECL TRANSLATOR |
| Channel Type | Unidirectional |
| Output Signal | PECL, TTL |
| Translator Type | Mixed Signal |
| Input Signal | TTL, PECL |
| Channels per Circuit | 2 |
| Output Latch or Register | NONE |
| Delay-Max | 5.5 ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
SY10ELT28KI-TR Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is now available to you.Packaged as Tape & Reel (TR).In this configuration, the output is set to Differential.There is Mixed Signal translator type for this electrical device.Mounting this electronic component follows the Surface Mount method.Level translators has the Channel type Unidirectional.-40°C~85°C TA is the operating temperature.Due to its superior flexibility, it uses 1 circuits.0 terminations are used to end transmission lines.A series of related parts can be derived from the base part number 10ELT28.In order to power the device, a voltage supply of 5V is required.A total of 8 pins are included.The device is part of the 10ELT series.There are 1 bits in this electronic part.Also, ALSO TRUE AS O/P POLARITY FOR DIFF PECL TO TTL AS DEFAULT characterize it.As a rule of thumb, the supply voltage (Vsup) should never be below 4.75V.
SY10ELT28KI-TR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
10ELT series
SY10ELT28KI-TR Applications
There are a lot of Microchip Technology SY10ELT28KI-TR voltage translators & level shifters applications.
- GPIO
- UART
- Electronic Points of Sale
- Available in Military (–55°C/125°C) Temperature Range
- SMBus
- Personal computers
- Infotainment Head Unit
- ADAS Fusion
- Product Traceability
- Eliminate Slow or Noisy Input Signals
