SY10EP51VMG-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, 8-MLF® |
| Number of Pins | 8 |
| Supplier Device Package | 8-MLF® (2x2) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 10EP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | -3V~-5.5V |
| Frequency | 3GHz |
| Base Part Number | 10EP51 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 500 ps |
| Quiescent Current | 40mA |
| Current - Quiescent (Iq) | 40mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| RoHS Status | ROHS3 Compliant |
SY10EP51VMG-TR Overview
8-VFDFN Exposed Pad, 8-MLF?is the packaging method. The Tape & Reel (TR)package contains it. It is configured with Differentialas an output. The trigger it is configured with uses Positive, Negative. This electronic part is mounted in the way of Surface Mount. Powered by a -3V~-5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 10EPseries of FPGAs. It should not exceed 3GHzin its output frequency. A total of 1 elements are present. T flip flop consumes 40mA quiescent energy. The 10EP51 family contains it. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. The design is based on 1bits. In terms of quiescent current, it consumes 40mA . -50mAis the output current at high level. 50mAis set as the low level output current. A temperature below 85°Cshould be used for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 3V, it is capable of operating. It supports the maximal supply voltage of 5.5V. This frequency can be achieved at 3GHz.
SY10EP51VMG-TR Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
SY10EP51VMG-TR Applications
There are a lot of Microchip Technology SY10EP51VMG-TR Flip Flops applications.
- Event Detectors
- Storage registers
- Counters
- Differential Individual
- Test & Measurement
- High Performance Logic for test systems
- Bounce elimination switch
- Asynchronous counter
- Circuit Design
- Patented noise
