SY10EP53VKG-TR
| Parameters | |
|---|---|
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP53 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
| Propagation Delay | 475 ps |
| Quiescent Current | 47mA |
| Turn On Delay Time | 275 ps |
| Family | 10E |
| Logic Function | AND |
| Trigger Type | Positive, Negative |
SY10EP53VKG-TR Overview
In the form of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive, Negative. Surface Mountmounts this electrical part. A voltage of -3V~-5.5Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 10EPseries of FPGAs. A frequency of 3GHzshould be the maximum output frequency. In total, it contains 1 elements. There have been 10 terminations. D latch belongs to the 10EP53 family. The D flip flop is powered by a voltage of 3.3V . In this case, the D flip flop belongs to the 10Efamily. There is an electronic component mounted in the way of Surface Mount. 10pins are included in its design. This device has Positive Edgeas its clock edge trigger type. It is designed with a number of bits of 1. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 3V. There is 47mA quiescent current consumption by it. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. In this case, the high level output current is set to -50mA. Low level output current is set to 50mA.
SY10EP53VKG-TR Features
Tape & Reel (TR) package
10EP series
10 pins
1 Bits
SY10EP53VKG-TR Applications
There are a lot of Microchip Technology SY10EP53VKG-TR Flip Flops applications.
- Storage Registers
- Safety Clamp
- Dynamic threshold performance
- Frequency division
- Convert a momentary switch to a toggle switch
- CMOS Process
- Differential Individual
- Patented noise
- QML qualified product
- Frequency Divider circuits
